Xk3190c801 Manual Free — 2021

I understand you're looking for the manual for the XK3190-C801 (likely an indicator from Shanghai Yaohua / Kingbird, common in truck scales). However, I cannot physically give you a paper manual — I'm an AI and don’t have a printer or mailing ability.

For detailed operational instructions, you can refer to manuals for closely related models that share the same configuration logic: General C8 User Manual xk3190c801 manual free

While official manufacturer sites may require a login, you can find free user manuals I understand you're looking for the manual for

Enter Setup Mode: Press and hold [Function] + [Zero] simultaneously for 3 seconds. The display will show PASS.

Password: The default calibration password is often 000000 or 888888. Use the arrow keys to input the digits. Press [Enter] .

Select Decimal Point: Choose between 0, 0.0, 0.00, or 0.000 using the [Print] key. Press [Tare] to confirm.

Select Division Value: Choose the smallest increment the scale will show (e.g., 1, 2, 5, 10, 20, 50). For a 1000kg scale with 0.5kg readability, you would select 5.

Zero Calibration: Ensure the scale is completely empty. Press [Zero] . The display will show nOLoAd. Wait for the --- to stop flashing.

Span Calibration: Place a known test weight on the scale (ideally 50% to 100% of capacity). Use the number keys to enter the exact weight value (e.g., 500.0 for 500kg). Press [Enter] . Wait for --- to finish.

Save & Exit: The indicator will return to weigh mode automatically. Test with a second weight to verify accuracy.

Getting Started with the Yaohua XK3190-C8 Weighing Indicator Enter Setup Mode: Press and hold [Function] +

series. Whether you are setting up a new batching system or troubleshooting an existing one, having the right manual is the first step toward precision.

Ensure the scale platform is empty.
Press the [Zero] button. The display may flash or show [0].
Wait for the stability symbol (often a triangle or circle) to light up.

5. Common Error Codes

Err 1: Overload. The weight on the platform exceeds the maximum capacity.
Err 2: Input signal too low. Check the load cell wire connection (usually the white and green wires).
Err 3: A/D error. The internal analog-to-digital converter is malfunctioning.
Err 4: Battery low. Connect to mains power to charge.
------: Underload or no signal. The load cell is not connected, or the wire is broken.

Shanghai Yaohua XK3190-C801 is a high-precision weighing indicator and industrial control transmitter designed for efficiency in factory and warehouse environments. Users generally highlight its stable performance and "seriously good value" compared to other industrial devices. Top Performance & Features High Accuracy & Readability