The is a common, budget-friendly 802.11n mini USB wireless adapter typically capable of speeds up to 150Mbps or 950Mbps. Because these adapters are often generic (white-labeled), they may use different internal chipsets, which can make finding the right driver tricky. 1. Identify Your Chipset
Pix-Link Support: This adapter is often rebranded by Pix-Link; you can check the Pix-Link Download Center for specific firmware related to the "UW06BT" variant. How to Install Wireless USB Adapter LV-UW06 iso : BGN - Internet Archive
Final note: This adapter is also sold under generic names like "OURLINK" or "Cudy WU1300" — any driver for the RTL8811CU will work perfectly.
- Right-click the Start button and select Device Manager.
- Look for an entry called Other Devices or Network Adapters. You might see a device with a yellow exclamation mark named
USBor802.11n NIC. - Right-click that device and select Properties.
- Go to the Details tab.
- Under "Property," select Hardware Ids from the dropdown menu.
- Look at the values:
Where NOT to Download the Driver
Avoid these common dangerous sources:
Step 4: Verify installation
- Plug in the LV-UW06 adapter.
- Right-click Start → Device Manager → Network adapters.
- Look for “Realtek 8812BU Wireless LAN 802.11ac USB NIC” or similar.
- If you see a yellow exclamation mark, the driver didn’t install correctly.
Internet Archive (Full CD ISO): A complete backup of the original installation CD that comes with these boxes. It contains drivers for both MediaTek and Realtek versions. Wireless USB Adapter LV-UW06 ISO
: If you are downloading on a different device because the target PC has no internet, save the driver to a USB flash drive Extract Files : Right-click the downloaded file and select Extract All : Open the extracted folder and double-click Administrator Rights : Right-click the setup file and select Run as administrator to ensure proper installation.
Quick summary of steps: