WARNING: the gEDA project is not actively developed anymore. You may want to switch to the Ringdove EDA project which is similar in spirit but is active.

Software |best| | Weierwei Vev-3288s Programming

To program the Weierwei VEV-3288S, you will typically need a dedicated USB-to-serial cable and specific software often shared with Puxing models (specifically the Puxing PX-777 ), as the hardware is nearly identical. 1. Required Hardware Programming Cable

Save this as a backup: File → Save As → Vev3288s_Factory_Backup.dat Weierwei Vev-3288s Programming Software

Due to common compatibility issues with official software, many users recommend the Puxing 6-in-1 software or generic To program the Weierwei VEV-3288S, you will typically

Final Verdict: Clunky, but critical. Don’t buy the radio without securing the software and a quality cable first. Install CHIRP daily build (not legacy)

To program with CHIRP:

  1. Install CHIRP daily build (not legacy).
  2. Go to Radio → Download from Radio.
  3. Vendor: Baofeng (or Pofung)
  4. Model: UV-5R (or try “Weierwei” if listed)
  5. Port: COMx
  6. Read, edit, and upload.

Step 3: Read Data from the Radio (Backup!)

Always read from the radio first before writing.

Software Compatibility: If the software won't open, right-click the .exe file and select "Run as Administrator" or use "Compatibility Mode" for Windows XP or 7. Conclusion

Weierwei Vev-3288s Programming Software