Vijeo Designer 62 Tutorial !!hot!! -

Vijeo Designer 6.2 is Schneider Electric's HMI configuration software used for creating interfaces on Magelis (now Harmony) terminals Steven Engineering Quick Setup & Project Steps

Variables act as the bridge between your PLC memory and the HMI screen. Variables Editor vijeo designer 62 tutorial

Vijeo Designer 6.2 is Schneider Electric's flagship software for configuring Magelis HMI Vijeo Designer 6

If you need to find your project files manually, they are typically hidden here: C:\Users\Public\Documents\Vijeo-Designer\Vijeo-Manager for custom logic Modbus TCP communication step-by-step for remote HMI access via a browser Creating a Vijeo Designer Placeholder | Schneider Electric Provide step-by-step screenshots for one common panel model

• Provide step-by-step screenshots for one common panel model (Magelis), or
• Generate a sample project tag table (CSV) for a typical Start/Stop plus analog inputs and alarms.

Tip: If you don’t have a physical HMI, use GTW – this allows full PC simulation.

• Press START – the lamp turns green.
• Watch the counter increase.
• Press STOP – lamp turns gray, counter stops.
• Press START again – counter continues from where it left off.

1. In Browser > Project Scripts (or Screen Scripts).
2. Event Type: Cyclic (runs every 200ms).
3. Write a simple VB-like script:

   If PLC_Start = 1 Then
       ' Flash a warning if speed is zero while start is on
       If PLC_Motor_Speed = 0 Then
           Warning_Lamp_Visible = True
       Else
           Warning_Lamp_Visible = False
       End If
   End If
   

Name,Temperature,Speed
"Chocolate",150,40
"Steel",800,120