Vag 908 Usb: Driver 64 Bit

To install the VAG 908 USB driver on a 64-bit Windows system (including Windows 10 and 11), you generally need to use drivers that emulate a Virtual COM Port (VCP). Since version 908 is a legacy release, modern 64-bit operating systems may require manual installation via the Device Manager. Installation Guide for 64-bit Systems Download Official Drivers : It is highly recommended to obtain drivers from the Ross-Tech Virtual COM Port Drivers page , as these are designed for 64-bit compatibility. Run the Installer : Unzip the downloaded file and run the VAG-COM-USB-Driver-Installer.exe

Official and legacy drivers can be found through several sources: vag 908 usb driver 64 bit

Step 1: Disable Driver Signature Enforcement (Critical for unsigned drivers)

Most clone VAG 908 cables use modified, unsigned 64-bit drivers. Windows 10/11 blocks these by default. To install the VAG 908 USB driver on

while the cable is connected to both the computer and the vehicle (with the ignition on). Troubleshooting Tips Security Settings : For successful installation, you may need to disable Windows Defender Run CH341SER

Modern computers primarily run on 64-bit operating systems (Windows 7, 10, or 11), which require specific 64-bit drivers to communicate with external hardware. Using an incorrect or 32-bit driver for your Vag 908 cable often results in common errors such as: "Device Not Recognized"

  1. Run CH341SER.EXE as Administrator.
  2. Click Install.
  3. Wait for "Driver installed successfully".
  4. Restart.

Problem 3: Cable works on USB 2.0 but not USB 3.0

  • Fix: Use a USB 2.0 port (black plastic inside) or a powered USB hub. Many VAG 908 cables are sensitive to USB 3.0 power management.