Traice Dvr Password Reset Page

To reset the password on a Traice DVR , you can use several methods depending on whether you have physical access to the device or can use software-based recovery tools. 1. Try Default Credentials

1. Create a New Password: Go to Main Menu > Configuration > User Management. Change the admin password to something you will remember (e.g., StreetName2026).
2. Set a Security Email: If your model allows it, enter a valid email address for future resets.
3. Export Configuration: Go to Main Menu > Maintenance > Config Import/Export. Save a .conf file to a USB drive. If you forget the password again, you can re-upload this file to restore settings.
4. Re-sync Your Phone App: Delete the old device from your phone app (e.g., iDMSS, gDMSS, or Traice’s proprietary app). Scan the new QR code or manually enter the new password.
5. Re-configure Motion Detection: A hard reset erases motion zones and recording schedules. Set these up again.

5. Security Implications & Recommendations

• Default Credentials: Once access is restored, ensure the default password is changed immediately.
• Port Forwarding: If the DVR is exposed to the internet via port forwarding, weak passwords are a significant security risk. Use a strong, complex password.
• Firmware Update: Check for firmware updates on the manufacturer's site, as newer firmware may offer better security features or account recovery options (like email reset).

: If there is no external button, you may need to open the casing and look for two pins labeled "TP1/TP2" or "Reset." Shorting these pins while powering on the device can trigger a factory reset. CMOS Battery traice dvr password reset

Quick checklist (recommended order)

1. Try on-screen “Forgot password” or QR reset.
2. Use cloud/mobile account recovery.
3. Try default credentials and sticker info.
4. Perform factory-reset button procedure.
5. Contact vendor support with serial/MAC and proof.
6. Use serial/UART or firmware reflash only if you accept warranty/data risks.

Important: Do not close the window or reboot the DVR while waiting for the code, as the dynamic password is often time-sensitive. 2. Physical Factory Reset To reset the password on a Traice DVR