Thyssenkrupp Levant Stair Lift Installation Manual Top Here

Thyssenkrupp Levant stair lift is a robust accessibility solution designed for straight staircases, known for its ergonomic "wraparound" seat and silver aluminum rail

• Alignment Pins: Slide the sections together. The manual warns “Do not hammer directly on the rail.” Use a rubber mallet on a block of wood.
• The Joint Screw: At the top of the joint, tighten the hex screw to 8 Nm. Over-tightening strips the aluminum threads.

Fit mounting brackets

Installer tips for best results

• Use sacrificial packing under brackets to protect wood treads during drilling.
• Pre-fit long rail sections on the floor to check alignment before lifting.
• Always bench-test electrical components before final assembly.
• Keep a spare fuse and a basic battery pack on service visits.

Before starting the installation, please read and understand the following safety precautions: thyssenkrupp levant stair lift installation manual top

Alignment: Position the rail on the stairs, ensuring it is either mounted to the wall or the stair treads using landing brackets. Thyssenkrupp Levant stair lift is a robust accessibility

. The installation process is highly structured, focusing on securing the rail directly to the stair treads rather than the wall, which minimizes structural changes to the home. Core Installation Phases Rail Setup and Alignment Alignment Pins: Slide the sections together

Pre-Installation Requirements