Sp Flash Tool Stuck On Download Da 100 __top__ Page
If your SP Flash Tool is stuck on "Download DA 100%", you are not alone. This is one of the most common errors when flashing MediaTek (MTK) devices.
Version selection by chipset:
| Chipset | Recommended SP Flash Tool | |---------|---------------------------| | MT65xx (older than 2016) | v5.1532 or v5.1628 | | MT67xx / MT81xx | v5.1824 or v5.1916 | | MT6762 / MT6765 (Helio P22/P35) | v5.2020 or v5.2108 | | MT6833 / MT6893 (Dimensity) | v5.2208 or newer + Auth file | sp flash tool stuck on download da 100
The primary reason for this stall is that the flash tool is waiting for a response from the device that never arrives. This can be caused by: Driver Conflicts : Improperly installed or outdated VCOM drivers If your SP Flash Tool is stuck on
- Open SP Flash Tool → Load scatter file → Click Download.
- Now connect the powered-off phone via USB.
- Do not hold any buttons unless specified (some phones need Vol+ or Vol-).
If you're stuck on v5.20+, try v5.19xx. Many users report success by dropping back to SP Flash Tool v5.1824 for "DA 100%" errors on older phones. Open SP Flash Tool → Load scatter file → Click Download
If you see a yellow triangle, right-click and update the driver manually. 📂 Method 2: Use the Correct DA and Scatter Files
Solution 4: Flash in "Download Only" Mode (Not "Firmware Upgrade")
Many users unknowingly select "Firmware Upgrade" which tries to repartition the eMMC and rewrite the preloader—this frequently triggers a DA hang if any partition is corrupted.
- Try using a different USB port on your computer.
- Replace the USB cable with a new one to rule out any issues with the current cable.