Sc673-10 Ricoh Error ((full)) Direct

The SC673-10 error on Ricoh devices is a communication failure between the Smart Operation Panel (SOP) and the main controller (CTL) during startup. This specific sub-code indicates that "Flair" communication—the link used by smart panels—is not reaching the panel.  Core Causes 

In some cases, the error occurs because the "Cheetah Panel Connect Setting" is not enabled. sc673-10 ricoh error

Step 2 – Enter “Panel Safe Mode” (if possible)

Some Ricoh models allow booting the panel in a minimal mode: The SC673-10 error on Ricoh devices is a

• Try reseating the cables first.
• If that fails, prepare to replace the HDD.

Restart: Power the machine off and on again to finalize the reset. Likely Component Issues Try reseating the cables first

. If it has reverted to "0," the controller will not "look" for the Smart Panel, triggering the SC673-10 error. 3. Check for Loose Cables