Samsung Aj068txj3kg Eu Installation Manual

The installation manual for the Samsung AJ068TXJ3KG/EU outlines strict, 16-step procedures for qualified personnel to install the 6.8 kW multi-split outdoor unit, highlighting essential safety measures for handling R-32 refrigerant, proper site clearances, and specific anti-corrosion requirements for coastal areas. The document emphasizes technical precision in refrigerant pipe management and electrical connections to ensure optimal performance of the Digital Inverter Boost technology. For detailed installation procedures, consult the official Samsung Climamarket Installation Manual Air conditioner - Installation manual

1. Mount the indoor unit to the wall or floor stand, ensuring proper support and stability.
2. Connect the refrigerant pipes to the indoor unit, following the manufacturer's instructions.
3. Connect the drain hose to the indoor unit, ensuring proper drainage.

• Hang unit on the wall plate, ensuring pipes pass cleanly through the hole.
• Tighten flare nuts to specified torque (typically 20–30 Nm for small diameters; verify spec). Use two wrenches to avoid twisting fittings.

• Only F-Gas certified technicians may handle the refrigerant circuit.
• You must record the quantity of refrigerant added in a logbook.
• Leak checks are required every 12 months for systems with >5 tonnes CO2 equivalent.

• Max Piping Length: 30 meters (total length).
• Max Elevation Difference: 20 meters (Outdoor unit higher than indoor) or 10 meters (Outdoor lower).
• Min Piping Length: 3 meters.

Q: What type of refrigerant pipes are required for the AJ068TXJ3KG EU? A: The AJ068TXJ3KG EU requires refrigerant pipes that are specifically designed for air conditioning systems. samsung aj068txj3kg eu installation manual