Rok: Power Washer Instructions New

The "ROK" brand of power washers is a popular budget-friendly range often found at retailers like

Pros: The diagrams are surprisingly decent. The visual cues for connecting the high-pressure hose to the gun and the garden hose to the inlet are easy to follow. The safety warnings are standard and prominent (which is good for liability, though tedious to read through).
Cons: The text is often quite small. If you are setting this up in a dimly lit garage, you might struggle to read the font. The manual assumes you already have a standard garden hose setup ready to go and doesn't offer much advice on adapters if your tap is non-standard.

Rok power washer — Complete user guide (deep write-up)

Important safety first

Read the manufacturer's manual before use.
Protective gear: eye protection, hearing protection, gloves, closed-toe shoes.
Electrical safety (electric models): use GFCI outlet; keep plug and outlet dry; avoid extension cords unless rated for outdoor use and heavy load.
Fuel safety (gas models): store and fill fuel outdoors, cool engine before refueling, ventilate well.
Keep bystanders and pets away. Never point wand at people, animals, or fragile surfaces.

To preserve the pump, turn off the water supply and squeeze the trigger to release trapped pressure before disconnecting any hoses. If storing the unit during winter, use a pump protector to prevent internal corrosion and freezing. How to Start a Gas Powered Pressure Washer - Mi-T-M rok power washer instructions new

Pressure, flow, and settings

Pressure (PSI) — higher PSI removes tougher stains but can damage surfaces. Typical household washers: 1,300–3,000 PSI.
Flow (GPM) — higher flow rinses faster; cleaning speed = PSI × GPM.
Match nozzle angle to PSI and surface: 40° (light), 25° (medium), 15° (heavy), 0° (very concentrated).

: Screw one end to the machine's water outlet and the other to the trigger gun. Ensure these are tight to prevent leaks, which can cause pressure loss. Water Inlet The "ROK" brand of power washers is a

Mount the wand: Screw the spray wand firmly into the trigger handle. Pros: The diagrams are surprisingly decent

9. Maintenance Schedule (New Model)

Before each use: Check oil level (if oil-filled model), inspect hose for cracks.
Every 50 hours: Clean inlet filter.
Yearly: Replace worn O-rings and nozzle seals.

High-Pressure Hose: Connect one end to the pump outlet and the other to the trigger gun. Tighten firmly to prevent leaks.