The workshop smelled of solvent and warm plastic. Under a single swinging lamp, Lena unfolded a brittle manual labeled NARISHIGE PC-10—its corners softened by oil and years—then, with the care of someone handling a relic, set it beside the device.
Included Accessories: The device typically ships with GD-1 glass capillaries (with filament), a spare heater, and a power supply cable. narishige pc10 manual new
A new manual is not just paperwork—it is a safety device. If your lab still uses a PC-10, print a fresh copy and laminate the calibration page next to the machine. The workshop smelled of solvent and warm plastic
: Set the "No.2 Heater" level. This stage finalizes the tip diameter and shape. 4. Error Messages & Troubleshooting Common error codes for the PC-10 include: : Slider distance set to 0mm. : Set to 1mm or longer. : First pull completion not detected. : Increase No.1 Heater output. : Slider speed too fast during first pull. : Reduce No.1 Heater output or weight. : Heater contact failure or broken heater. : Tighten fixing screws or replace heater. A new manual is not just paperwork—it is a safety device