Motorola Evx-261 Programming | Software Updated

The primary software for the Motorola (Vertex Standard) EVX-261 is the CE156 PC Programming Software. This software allows you to configure channel frequencies, privacy codes, and programmable button functions. Software & Hardware Requirements

• Frequency ranges (UHF 403–470 MHz or VHF 136–174 MHz)
• Channel spacing (12.5 kHz for digital, 25 kHz for analog)
• Privacy codes (CTCSS/DCS)
• Digital talk groups and contacts
• Scan lists and priority channels
• Power output levels (High/Low)
• Time-out timers and battery saver settings

1. Connect: Plug the cable into the radio's accessory port (side jack) and the USB into the PC.
2. Read the Radio: Open the CPS software, go to Program > Read Radio. This loads the current configuration into the software.
3. Configure:
   • With the software installed, plug in the programming cable (but not yet the radio).
   • Open Device Manager → Ports (COM & LPT). Look for "Prolific USB-to-Serial" or "FTDI."
   • Note the COM port number (e.g., COM3).
   • Part Number: HVN9025 (for the EVX series software suite)
   • Cost: Approximately $199–$299 USD.
   • Process: Log in to Motorola’s Business Portal, search for the part number, purchase, and download.

   She’d bought six of them surplus from a neighboring district. They were rugged, waterproof, and denser than a law textbook. But they were silent. Without the right software, they were just expensive paperweights. motorola evx-261 programming software

   Channel Management: Set specific frequencies for up to 16 user-configurable channels. The primary software for the Motorola (Vertex Standard)

   This guide provides a deep dive into everything you need to know: where to find legitimate software, how to install it, which cable to use, and step-by-step instructions for your first programming session. Frequency ranges (UHF 403–470 MHz or VHF 136–174