Mikrotik L2tp Server Setup Full ((new))

The Complete Guide: MikroTik L2TP Server Setup (Full Configuration)

Introduction

In the world of remote access, security and reliability are paramount. While PPTP is now considered obsolete due to known vulnerabilities, L2TP (Layer 2 Tunneling Protocol) combined with IPsec provides a robust, secure, and widely compatible VPN solution. Almost every operating system—Windows, macOS, iOS, Android, and Linux—supports L2TP/IPsec natively, requiring no third-party client software.

To configure L2TP authentication, navigate to IP > VPN > L2TP and click on the Authentication tab. Click the + button to create a new authentication configuration. mikrotik l2tp server setup full

Android

Step 11: Verification and Testing

On the MikroTik:

Notes: ipsec-secret is the PSK clients must use. This setting auto-enables PPP service for L2TP. The Complete Guide: MikroTik L2TP Server Setup (Full

Step 1: Basic Router Preparation

First, ensure your MikroTik can route traffic and has basic firewall rules. We will create a dedicated IP pool for VPN clients. Name: Any Server: WAN IP L2TP Secret: Leave

Go to Settings > Network & Internet > VPN > Add a VPN connection. VPN Provider: Windows (built-in). VPN Type: L2TP/IPsec with pre-shared key. Pre-shared key: Enter the ipsec-secret you set in Step 4. Username/Password: Use the credentials from Step 3. L2TP IPSec Client to Site setup - General - MikroTik Forum

/ppp profile set default-l2tp-profile \
  local-address=192.168.100.1 \
  remote-address=l2tp-pool \
  dns-server=8.8.8.8,1.1.1.1 \
  use-encryption=yes \
  change-tcp-mss=yes \
  only-one=yes

Pro Tip: Setting use-ipsec=required forces clients to negotiate IPsec. No insecure L2TP-only connections allowed.