Instal Xprinter Xp-d4601b -

To install your Xprinter XP-D4601B, follow these steps to set up the hardware and drivers. 1. Hardware Setup

macOS may use generic ESC/POS drivers or require a third-party driver. Use manufacturer’s macOS driver if available or configure as a generic text/ESC/POS printer in your POS software.

C. Label size settings

The trickiest part: you must set custom paper size to 4″ × 6″ (102×152 mm) or your label size.
On Windows, create a new custom form in “Print Server Properties” before printing.
In shipping software, select “thermal printer” with 4×6 labels, not “laser/inkjet.”

Release the button when the light flashes red. The printer will feed a few labels to detect the gap. instal xprinter xp-d4601b

Title: Bridging the Digital and Physical: A Guide to Installing the Xprinter XP-D4601B To install your Xprinter XP-D4601B , follow these

Step 5 — Test print & configuration

Print a self-test: with printer off, hold the feed button and turn on power; release when test begins. This prints firmware, interface status, and default settings (including IP if networked).
From your computer, print a test page via Devices and Printers (Windows) or CUPS (Linux/macOS).
If printing is garbled, confirm correct driver, baud rate (serial), or correct IP/port (network).