Hi Sharp Dvr | Reset Password Fix

Resetting a Hi Sharp DVR password generally involves using default credentials, generating a "Dynamic Code" for technical support, or performing a hardware reset on the motherboard. 1. Try Default Credentials

Method 4: Hard Factory Reset (Last Resort – You Will Lose Settings)

If official support is unavailable (e.g., the company went offline or your DVR is very old), you can perform a hardware reset. This will wipe all passwords, network settings, and user preferences, but your recorded video footage usually remains intact unless you also format the hard drive. hi sharp dvr reset password fix

1. Power down the DVR completely and unplug it.
2. Remove the cover/screws from the DVR casing to expose the internal circuit board (motherboard).
3. Look for a small, circular, silver battery (CR2032 type) on the motherboard.
4. Remove the battery carefully.
5. Wait for 5 to 10 minutes. This drains the capacitors and clears the CMOS memory (where the password is stored).
6. Re-insert the battery.
7. Close the case, plug in the DVR, and power it on.
8. The system should have reverted to factory defaults.
9. Default Login after reset:

   This is the standard procedure for current Hi Sharp DVRs/NVRs. Resetting a Hi Sharp DVR password generally involves

   1) Try default and common master passwords (quick, non-destructive)

   Many SHARP/third-party DVRs ship with factory or vendor master passwords. Try these first: Power down the DVR completely and unplug it

   • Try the factory default master codes: