Harvey Hv3 Water Softener Installation Manual Free !!exclusive!!

The Ultimate DIY Guide to Harvey HV3 Go to product viewer dialog for this item. Water Softener Installation

Connect the 3/8” drain tube to the "JG" (John Guest) push-fit connection on the softener. Run this to a suitable waste point with an air gap to prevent back-flow.

• Water hammer arrestors: If your home has pressure > 4 bar, the manual specifies an external PRV (pressure reducing valve). Many online summaries omit this.
• Disinfection after installation: The manual requires sanitizing the resin with a specific chlorine solution if not used immediately. Skipping this leads to bacterial growth.
• UK WRAS compliance: The HV3 must be installed according to Water Supply (Water Fittings) Regulations. The manual cites exact clauses. Without them, your water provider can force a removal.

6.1 Harvey Technical Support

• Phone: +44 (0) 1252 780 000 (UK)
• Email: support@harvey.co.uk They can clarify manual diagrams and provide firmware updates for the controller.

4. Electrical Connection

The HV3 uses a 12V DC transformer (plug-in). The manual stresses:

: Manually fill the cabinet with water until the salt platform is covered by about , then place two salt blocks in the bays. Digital Integration : If your HV3 includes an , download the myHarvey app to pair the device and monitor salt levels. UK Water Softeners or instructions for setting up the BLOCK SALT SOFTENER INSTALLATION INSTRUCTIONS

What is Included in the Official Harvey HV3 Installation Manual?

A genuine, free copy of the manual (usually a 20-30 page PDF) contains critical sections that no YouTube video can fully replace:

Access: Ensure you have easy access to the main cold water pipe and a suitable drain point.