Gent Vigilon Commissioning Tool Install ((new)) (Chrome)

To install the Gent Vigilon Commissioning Tool, you must be a registered Gent System Integrator or an approved partner

3.2 Software & Licensing

• Official Vigilon commissioning application installer (obtain from vendor/distributor).
• Valid software license or dongle if required.
• .NET Framework dependencies (commonly required by vendor tools) — ensure matching versions.
• Device drivers for USB programming cables (FTDI/Prolific) installed and verified.

I will be on-site for the remainder of the day to assist with the initial setup. Please let me know if you need access to the laptop for any preliminary checks. gent vigilon commissioning tool install

Gent Vigilon Commissioning Tool Installation Review To install the Gent Vigilon Commissioning Tool, you

Part 7: How to Uninstall & Reinstall Cleanly

If your installation is beyond repair, here is the nuclear clean-up procedure: I will be on-site for the remainder of

Official Downloads: Authorized users can find specific tools and resources through the Honeywell Gent Download Centre . 2. Physical Installation & Connection Setup

Part 1: Understanding the Software Versions

Before you begin the Gent Vigilon Commissioning Tool install, you must identify which version you possess. The installation routine differs significantly between legacy and modern builds.

4. Installation Procedure (Step-by-step)

1. Verify laptop OS updates and create a system restore point.
2. Install required .NET Framework or VC++ redistributables if not present.
3. Install USB cable drivers; confirm the cable appears as COM port in Device Manager.
4. Run the commissioning tool installer as Administrator; follow prompts.
5. If the tool requires a hardware dongle, connect it before launching.
6. Open the application; configure program settings (COM port, baud rate — commonly 9600/19200; or network IP and port).
7. Update tool to latest patch if an update mechanism is available.
8. Import or create project file; set panel model and firmware target.

• Use the appropriate communication media (e.g., RS232, USB, or Ethernet) to connect your computer to the Vigilon system's control panel.
• Ensure the Vigilon system is powered and in the appropriate mode to allow communication.