Fix Generator V 1 1 Samsung Scx 3405 ((link))
⚠️ Important Disclaimer: Using third-party software tools to reset firmware counters can risk damaging your printer. Proceed with caution and at your own risk. Additionally, be aware of your local laws regarding the circumvention of digital locks.
Advanced Solutions
An 11-digit serial number linked to the toner chip, found in the Supplies Information report. Current Firmware Version: fix generator v 1 1 samsung scx 3405
The Samsung SCX-3405 Fix Generator v1.1 is a third-party software tool used to create custom modified firmware (known as "fix" firmware) that allows the printer to operate without the need for a toner cartridge chip. This process, often referred to as "resofting," enables users to refill toner cartridges or use cheaper non-original cartridges without the printer locking out due to "toner low" or "toner empty" errors. How the Fix Generator Works This often requires a firmware reflash
Identify the Firmware Version: Crucial for ensuring compatibility, as applying the wrong version can "brick" the device. Serial Number (SN): A unique identifier for your hardware. Chip Bypass: Disables the printer's need for the
3. Fix "U2-1113" (Engine / Mainboard Error)
- This often requires a firmware reflash. You can use the official Samsung Firmware Download Utility (now from HP Support) – not the v1.1 generator.
Chip Bypass: Disables the printer's need for the CRUM (Customer Replaceable Unit Monitor) chip on the toner cartridge.
Step 3: Run the Generator Tool
- Run as Administrator: Open the folder where you extracted the tool, and run the Generator V 1.1 executable file as an administrator.
- Select Model: If prompted, select the Samsung SCX-3405 from the list of supported models.
The utility works by modifying the printer's firmware so that the toner counter automatically resets to 100% every time the printer is restarted. This process typically requires three pieces of information from your printer: Serial Number (SN) CRUM Number (the cartridge identification series) Firmware Version (e.g., V3.xx.01.xx) How to Retrieve Printer Information To generate a custom fix, you must print the Configuration Supplies Information Standard Method : Press and hold the STOP/CLEAR