Commax Dp-ra01 Installation Manual

The COMMAX DP-RA01 is a wall-mounted room unit (handset) designed for single-house doorphone systems. It primarily functions as an intercom to communicate with a door station and control an electronic door release. Pre-Installation Safety Guidelines

7. Power Supply Requirements

The DP-RA01 does not include a power brick. You must provide: commax dp-ra01 installation manual

Connect the wires from the door station and power source to the terminals on the back of the handset. Attach Handset: Align the grooves on the back of the The COMMAX DP-RA01 is a wall-mounted room unit

: The manual clearly outlines the 2-wire connection for electric door locks. Note that for most standard setups, the door release button on the handset triggers the lock through these dedicated terminals. Key Specifications at a Glance Power Source AC 100-240V, 50/60Hz 2-wire (Door Station), 2-wire (Door Release) Max Distance 100m (Ø0.65mm) to 150m (Ø0.8mm) Surface Mount type with included bracket While functional, the instruction manual Power Supply Requirements The DP-RA01 does not include

Analysis of Commax DP-RA01 Installation Manual

: Connect the electric strike or gate control to the designated relay terminals (often marked as 5 and 6 or L1/L2) on the master station. Attach the Handsets