Code Soft Tp-3160s Driver

The Code Soft TP-3160S is a high-speed thermal receipt printer designed for point-of-sale (POS) environments. To ensure seamless communication between your hardware and software, installing the correct driver is essential. Download and Driver Installation Guide

Troubleshooting quick fixes

• Blank/partial labels: Re-check label length, DPI, and set correct media-type in driver.
• Faint prints: Increase print density, clean the print head, ensure correct thermal labels.
• Misaligned prints: Re-run label calibration; confirm sensor type (reflective/transmissive) matches media.
• Driver not found on network: Ping device IP, ensure firewall allows port 9100 (raw printing), assign reserved DHCP or static IP.

| Media Type | Driver Setting | Darkness | Print Speed | Gap/Black Mark | | :--- | :--- | :--- | :--- | :--- | | Paper Labels (Glossy) | Thermal Transfer | 18-22 | 3 IPS | Gap | | Synthetic/Polypropylene | Thermal Transfer | 24-28 | 2 IPS | Gap | | Direct Thermal (Shipping) | Direct Thermal | 12-14 | 4 IPS | Gap | | Continuous Roll (No gaps) | Continuous | 15 | 4 IPS | Black Mark | | Heat Shrink Tubing | Thermal Transfer | 26 (Max) | 1 IPS | Black Mark | code soft tp-3160s driver

• Bi-Directional Communication: The driver doesn't just send data; it listens. It reports real-time status back to the PC (Head Open, Paper Out, Ribbon Out, Pause).
• SNMP (Simple Network Management Protocol): If connected via Ethernet/Wi-Fi, the driver/interface supports SNMP traps. This allows a central server to ping the printer and get a response like "Toner Low" or "Media Jam" without walking to the physical location.

One-page deployment checklist

• Verify firmware & model
• Choose connection mode (USB/Serial/Ethernet)
• Install correct driver/PPD
• Configure DPI, label size, sensor type
• Calibrate and print test page
• Validate barcodes and print throughput
• Lock down network services and backup driver

: The drivers are compatible with various Windows versions, including Windows 7, 8, 10, and 11. How to Add a Printer Driver in CODESOFT The Code Soft TP-3160S is a high-speed thermal

If you want to use the printer with general POS software or standard Windows apps, you need the Windows Printer Driver Official Source : Since the Blank/partial labels: Re-check label length, DPI, and set

Error 3: Paper out error even when paper is loaded

Cause: The driver’s “Media Sensor” type is wrong. Fix:

Native/Internal Drivers: These are built directly into barcode software (e.g., TEKLYNX). Native drivers are recommended for label design because they provide better "What You See Is What You Get" (WYSIWYG) accuracy and allow direct control over thermal printer features.  2. Technical Specifications