Service Tool V5610 — Canon

Guide to Canon Service Tool V5610: Maintenance and Troubleshooting

(Note: Always verify compatibility with your specific model before attempting a reset.) canon service tool v5610

Example: Resetting Waste Ink Counter

1. Enter service mode (model-specific key sequence or software command).
2. Connect via USB and verify communication in the tool.
3. Click “Counter” or “Waste ink counter” and read current values.
4. If values are near/over limit, select “Set to 0” or “Initialization”.
5. Confirm action, then power-cycle the printer.
6. Physically clean or replace waste pads to avoid overflow.

Exceptions: It typically does not work with "one-off" or disposable models like the E40x, MG24xx, or MG25xx series for waste ink resets. How to Use Canon Service Tool V5610 Guide to Canon Service Tool V5610: Maintenance and

The V5610 version is designed for newer Canon PIXMA models (such as the G, MG, and TS series). If your printer is an older model, you may need an earlier version like V5103 or V5301. Enter service mode (model-specific key sequence or software

. If you change your computer's CPU or HDD, the license may become invalid. Compatibility: It supports a wide range of models including the TS9100 and TS9500 series

Alternatives to v5610

• Manual Pad Replacement + Third-Party Reset: Physically replace the waste ink pads or install an external waste ink tank, then use the tool to reset.
• WIC Reset Utility: A paid, user-friendly alternative that works on many newer models and includes safety checks.
• Buying a New Printer: For low-cost printers, replacing the device may be cheaper and safer than attempting a reset.

• Disassemble the printer and wash/dry the absorbent pads (or replace them with generic ink pads available on eBay/Amazon).
• Create a waste ink bottle mod (drilling a drain hole and redirecting the waste tube into an external container).