| 🔴 Гарантия на ремонт: | 2 года |
| 🔥 Специализированный сервис: | Land Rover и Jaguar |
| 🏆 Крупнейший автосервис: | в Москве |
| ⭐ Работаем ежедневно: | с 8:00 до 22:00 |
Время работы: с 08:00 до 22:00
Ежедневно, без выходных.
Title: Bosch KL 1208 User’s Manual — Essential Guide & Tips
Follow this specific sequence to avoid sparks near the battery: Verify the charger's voltage matches the battery (12V).
Explosion Risk: Charging produces explosive gases; do not smoke or use naked flames near the battery. Placement: Do not place on a heated base or in moist rooms.
Disconnect the battery leads in the reverse order of connection. Using the Battery Test Function
: Use the charger only at temperatures between 0°C and 35°C. Bosch Classic Connecting the Charger Always follow this specific sequence to prevent sparks: upload.sunsky-online.com Verify Polarity : Ensure the clamp is for Positive (+) and the clamp is for Negative (-). Connect to Battery Off-Vehicle : Connect Red (+) first, then Black (-). On-Vehicle (Negative Earth)
: Ensure the charging area is well-ventilated to prevent the buildup of explosive gases. Connection : Connect the terminal to the positive (+) battery pole and the terminal to the negative (-) pole. Powering On : Plug the charger into the mains power outlet only
No lights: Check the internal fuse or ensure the mains plug is fully seated.
Discovery
Freelander
Defender
Discovery Sport
Range Rover
RR Sport
Evoque
Velar
Jaguar
Наш менеджер свяжется с вами в самое ближайшее время!
Title: Bosch KL 1208 User’s Manual — Essential Guide & Tips
Follow this specific sequence to avoid sparks near the battery: Verify the charger's voltage matches the battery (12V).
Explosion Risk: Charging produces explosive gases; do not smoke or use naked flames near the battery. Placement: Do not place on a heated base or in moist rooms.
Disconnect the battery leads in the reverse order of connection. Using the Battery Test Function
: Use the charger only at temperatures between 0°C and 35°C. Bosch Classic Connecting the Charger Always follow this specific sequence to prevent sparks: upload.sunsky-online.com Verify Polarity : Ensure the clamp is for Positive (+) and the clamp is for Negative (-). Connect to Battery Off-Vehicle : Connect Red (+) first, then Black (-). On-Vehicle (Negative Earth)
: Ensure the charging area is well-ventilated to prevent the buildup of explosive gases. Connection : Connect the terminal to the positive (+) battery pole and the terminal to the negative (-) pole. Powering On : Plug the charger into the mains power outlet only
No lights: Check the internal fuse or ensure the mains plug is fully seated.
Мы перезвоним
через 30 секунд

