Bionix Prime Fit Exercise Bike Manual __exclusive__ Guide
Assembling the bike requires basic tools like an Allen key and a wrench.
Ride safe, maintain diligently, and enjoy the journey. Bionix Prime Fit Exercise Bike Manual
4. Control Panel Overview
- The seat is a medieval torture device.
- Felt pads will wear out every 6-12 months with heavy use.
- No tablet holder (you have to buy separately).
- LCD display is basic and inaccurate.
- Pedals are plastic/nylon (replace with metal $20 pedals eventually).
- Handlebar height adjustment is limited.
- Important: The pedals are directional.
- The Right Pedal (marked 'R') screws on clockwise.
- The Left Pedal (marked 'L') screws on counter-clockwise.
- Screw them in by hand first, then tighten firmly with the provided wrench.
- Unpacking: Carefully unpack the exercise bike and its components from the box. Make sure all parts are included and undamaged.
- Frame Assembly: Attach the rear stabilizer to the main frame using the provided bolts. Tighten securely.
- Seat and Handlebar Assembly: Attach the seat and handlebars to the main frame using the provided bolts. Adjust to your desired height and position.
- Pedal and Crank Assembly: Attach the pedals to the crank arms. Make sure they are securely tightened.
- Console Assembly: Attach the console to the main frame using the provided bolts. Connect the cables and ensure they are securely attached.
: Shows your current pedaling speed (usually in km/h or mph). DISTANCE (DIS) : Tracks how far you have "traveled" during the session. CALORIES (CAL) : Estimates the total calories burned. ODOMETER (ODO) Assembling the bike requires basic tools like an
Stabilizers: Attach the front stabilizer (with wheels) and rear stabilizer to the main frame using the provided carriage bolts, curved washers, and domed nuts. The seat is a medieval torture device