Autocraft Battery Charger Ac-60cr Manual =link= Now
Autocraft AC-60CR is a manual battery charger designed for standard lead-acid batteries. Because it is a manual charger, it does not automatically shut off; you must monitor the charge to prevent overcharging. Safety & Setup
- Follow steps 1-4 above.
- Select "60A Engine Start."
- Wait for the "Start Ready" light.
- Crank the engine for 3-5 seconds.
- If the engine fails, wait 3 minutes before trying again.
: Provides a real-time visual of the current draw. The needle typically moves toward "0" as the battery reaches full charge. Rotary Selector Switch autocraft battery charger ac-60cr manual
Generally includes modes for 12V Small/Motorcycle, 12V Car, and sometimes a 12V Lithium/LiFePO4 mode. Safety Features: Autocraft AC-60CR is a manual battery charger designed
If the battery is still in the vehicle:
Connect RED to positive, then BLACK to a solid engine ground (not the negative battery post) to avoid sparking near the battery. Follow steps 1-4 above
Preparation: Turn off all vehicle accessories and keep the hood open for ventilation.