Actia Psa Xs Evolution 9780z5 Driver Upd -

Getting the Actia PSA XS Evolution (9780.Z5) interface to work correctly on modern Windows versions—like Windows 10 or 11—can be a bit of a puzzle. This diagnostic tool is essential for Peugeot and Citroën owners using DiagBox, Lexia 3, or PP2000.

Device Manager: The hardware should appear under "Universal Serial Bus controllers" as "ACTIA USB Devices." Step 3: Clean Installation Procedure actia psa xs evolution 9780z5 driver upd

Part 7: Frequently Asked Questions

Q: Is the driver for 9780Z5 the same as for 9780Z4? A: Mostly yes. The Evolution series shares the same FTDI chip. However, the 9780Z5 has slightly different power management. Always use the driver labeled explicitly for “Evolution” series. Getting the Actia PSA XS Evolution (9780

Drivers Folder: Check C:\APPLIC\LEXIA\EXE or the installation media for a folder named "Drivers" or "USB." Open Device Manager (right-click Start button) Find the

Multi-instance: Often cited as the more stable choice for modern operating systems if the UMDF version fails.

This usually means the driver is installed, but the Firmware is out of sync with the software version. If you are using Diagbox 9.129 but your interface has firmware 4.2.2, you may need to run the firmware updater included with your driver package to bring it to 4.3.7 or higher. 64-bit vs 32-bit Compatibility

3. Uninstall Old/Conflicting Drivers

  1. Open Device Manager (right-click Start button)
  2. Find the ACTIA device (likely under Universal Serial Bus devices or Other devices)
  3. Right-click → Uninstall device → check “Delete driver software for this device”
  4. Unplug the ACTIA interface
TOP