A68064 Datasheet ((new)) ★ Updated & Trending

A68064 Datasheet: A Complete Guide to Pinouts, Specifications, and Applications

Introduction

In the world of power electronics and motor control, few components are as versatile and reliable as the A68064. Whether you are an embedded systems engineer, a robotics hobbyist, or a student working on a senior design project, the A68064 datasheet is your definitive reference for understanding this integrated circuit’s capabilities. This article serves as an extensive breakdown of the A68064 datasheet, covering electrical characteristics, pin configurations, thermal management, and real-world application circuits.

Motor Control: Suitable for both AC and DC motor drive systems. a68064 datasheet

Conclusion

• Outputs: 32 bipolar source outputs (sinking common).
• Voltage: Output rating up to 50V.
• Current: 40mA per output typical, 60mA max (depending on duty cycle).
• Logic: 3.3V or 5V CMOS-compatible serial input.
• Features: Internal CMOS shift register, latches, and output enable (active low).
• Package: 44-pin PLCC or similar (check variant).

Conclusion

is a semiconductor component, most commonly identified as a high-performance N-channel MOSFET or a specialized latch driver IC , typically manufactured by (now part of Littelfuse). It is primarily housed in a TO-220 package Outputs: 32 bipolar source outputs (sinking common)

Equivalent Series: Often grouped with A68063, A68066, and A68067 as part of a compatible series for industrial repairs Conclusion is a semiconductor component

The A68064 is a 64-bit serial-input latched sink driver. In simpler terms, it acts as a bridge between low-power logic (like a microcontroller) and high-power loads. It uses Allegro’s proprietary DABIC-5 (Digital/Analog BiCMOS) process, which allows it to combine high-speed CMOS shift registers and latches with high-voltage bipolar output drivers on a single chip. Key Features and Specifications